Ford Mondeo mk3 st220 K&N induction kit install, how to. - Video

So as requested many times, in this video i show how i installed my K&N induction kit into the wing on my Ford mondeo mk3 st220, you can use this to install any induction kit onto a mondeo mk3.

The kit I use is a K&N 57i kit that come with the mass air flow sensor adaptor, the induction filter itself and a few jubilee clips. The stainless steal pipes was 76mm diameter and 45 degree bend you will also need a straight silicon hose at 76mm diameter as well as a 45 degree silicon hose as well at 76mm diameter and a bunch of jubilee clips.

I would recommend removing the passenger wheel and wheel arch liner just to make this a bit easier. I done it this way to show that it can be done with the wheel still in place.

**TimeStamps**
0:00 - Ford mondeo mk3 st220 induction kit install
2:12 - Removal of the stock air box
11:11 - Installing the K&N 57i induction kit

Buy a K&N 57i kit here: https://ebay.us/OJ7SKR or a K&N stock panel filter here: https://ebay.us/ErUbhr (this one just replaces the stock air box panel filter)

Buy the 45 degree silicon hoses:
Blue - https://ebay.us/akTSvM
Black - https://ebay.us/wCg9A9
Red - https://ebay.us/4gKy77
Buy the Straight hose: https://ebay.us/OhWwJQ
Buy the 45 degree stainless steal pipe: https://ebay.us/s5EHos

If your a new Viewer please consider Subscribing so you don't miss what i get up to and if your returning leave a thumbs up for support, thanks:
https://www.youtube.com/c/ChazzCoombes?sub_confirmation=1

Share this video with a mate:
https://youtu.be/BGas_2scSOU

**If the video was helpful, leave a "thumbs up" and consider subscribing**

If doing these projects you do so at your own risk. If after watching any video you still feel unsure please seek the help of your local garage.