Making a Line Boring Tool Holder | Shop Made Tools - Video

In this video we show step by step how to make a tool holder (tool support) for our Line Boring bar! This tool holder is for our 40mm boring bar we run on our Sir Meccanica WS2 portable line boring machine, we already have a smaller shop made holder but need to make a bigger one for all our larger line boring jobs. To make this tool holder we are using a piece of 170mm diameter 1045 steel. We start with turning the OD and boring the ID on the lathe before setting up in the milling machine for drilling and reaming all the holes. We also use our 150T hydraulic press for broaching a square before drilling and fitting the hinge to complete the tool holder.

In this video we are using:
- Hafco TM-1740G Lathe
- BM-63VE Milling machine
- Hafco HMT-150 Hydraulic Press

Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe

To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/

Official CEE Merch shop: https://www.ceeshop.com.au

About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!

Music: https://www.epidemicsound.com/referral/rccrvr/

#australianmachinist #machineshop #machinist